95% Accuracy COVID-19 RTK Antigen Saliva Test Kit One Step Operate

Rapid Antigen Test Kit COVID-19 Antigen Saliva Rapid Test Kit High Accuracy Professional Test Kit

Intend Use

• The rapid test kit is intended for the qualitative detection of SARS-CoV-2 antigen in human saliva samples.
• It also can be used to detection of SARS-CoV-2 antigen in human saliva samples from novel coronavirus suspected person with symptoms within 9 days from onset.
• For the testing result can help to triage and rapid management of suspected populations in early time.
• To be attention, the result should not be used as diagnosis basis of SARS-CoV-2 infection.
• Further nucleic acid detection should be carried out for suspected population whose antigen test result is positive or negative.

Product Details

Product Feature

• Easy for use, One-step operate without other procedure
• Lower cost with high effective
• Save time, Get the result within 15 minutes
• Detection of mutations

Main Components

• 1 Test Cassette
• 1 Saliva Collector
• 1 Collection Tube
• 1 Sample Extraction Buffer (Single does)
• 1 Package Insert

STORAGE AND EXPIRY

Store as packaged in the sealed pouch at 2-30℃, avoid heat and sunshine, dry place, valid for 24 months. Do not freeze. Do not open the inner packaging until ready, it must be used within one hour if opened (Humidity≤60%, Temp: 20℃-30℃). Please use immediately when the humidity＞60%.

Use Step

• Open the cap of the collection tube and istall saliva collector.
• Put the collection tube with saliva collector close to lips and let the saliva flow into the collection tube. Tje volum of saliva needs to be half of 0.5 scal mark(0.25).
• Screw the sample extraction buffer carefully.

• Add all sample extration buffer to the collection tube. Discard the saliva collector, tighten the cap onto the specimen collection tube.
• Shake the specimen collection tube at least three time vigorously to mix the saliva and the extraction buffer. Squeeze bottom of the collection tube ensure the saliva is thoroughly mixed.
• Add 3 full drops of the solution to the sample well(S). Read the result at 15 minutes. Do not interpret the result after 20 minutes.

Result Interpretation

• POSITIVE: Two (2) distinct colored lines appear. One line should be in the control region (C) and the other line should be in the test region (T).

• NEGATIVE: One (1) colored line appears in the control region(C). No apparent colored line appears in the test region (T). The negative result does not indicate the absence of analytes in the sample, it only indicates the level of tested analytes in the sample is less than the minimum detection limit.

• INVALID: No colored lines appear, or control line fails to appear, indicating that the operator error or reagent failure. Verify the test procedure and repeat the test with a new testing device.

Virus Sources

Certificate

COVID 19 rtk antigen saliva test kit

One Step rtk antigen saliva test kit

95% Accuracy antigen kit saliva

95% Accuracy COVID-19 RTK Antigen Saliva Test Kit One Step Operate Images